Quarter 2 Report Card Grades

It’s only been 3 weeks since we discussed grades, but it’s been 9-weeks since we last discussed grades in relation to loss of eligibility for UIL. We are closing out the 2nd quarter of the year and this is when students can both gain AND lose their eligibility.

Continuing the practice I started at PR4, I continued to adjust grades to be in alignment with the campus policies for grade distribution. In the graphs below, the black represents the original (uncurved) grades for the grading period and the orange represents the modified (curved) grades for the grading period.

The first cluster is percentage of A’s, the second cluster is percentage of B’s, the third cluster is percentage of C’s, and the final cluster is percentage of F’s.

2nd Quarter - Computer Science
2nd Quarter – Computer Science
2nd Quarter - Principles of Technology
2nd Quarter – Principles of Technology
2nd Quarter - Robotics & Automation
2nd Quarter – Robotics & Automation
2nd Quarter - BIM (All Sections)
2nd Quarter – BIM (All Sections)

At the time of this writing, my current enrollment numbers are as follows:

  • Computer Science I – 15 Students (1 Section)
  • Principles of Technology – 26 Students (1 Section)
  • Robotics & Automation – 18 Students (1 Section)
  • Business Information Management I – 84 Students (4 Sections)

Pre-Exam Grades

It seems we were just talking about grades and here we are at the conclusion of the first semester! Hard to believe that we are now at the midway point of the 2016/2017 school year.

As we come into semester exams week, I have run my current S1 reports which factor Q1 and Q2 but don’t have a semester exam calculated in.

Computer Science I

1st Semester - Computer Science I (Pre-Exam)
1st Semester – Computer Science I (Pre-Exam)

As you can see, the grades in Computer Science for S1 led to a double-hump camel and not a nice bell curve. While we have a nice spike in the 80’s (42.85%), we have another smaller spike in the 50’s (14.28%).

Currently, this class has failure rate of 21.43%. Hopefully, the semester exam will be enough to pull some of those failures up to passes.

Principles of Technology

1st Semester - Principles of Technology (Pre-Exam)
1st Semester – Principles of Technology (Pre-Exam)

As you can see here, the grades don’t give us a nice bell, but there is no double-hump. At present, 44% of the students in the class are holding an “A” for the semester.

Currently, the class has a failure rate of 4%.

Robotics & Automation

1st Semester - Robotics & Automation (Pre-Exam)
1st Semester – Robotics & Automation (Pre-Exam)

As you can see here, the grades give us a nice bell, but it spikes in the 90’s. At present, 72% of the students in the class are holding an “A” for the semester with 38% of those holding a 100%.

Currently, this class has a 0% failure rate!

Business Information Management I

1st Semester - Business Information Management - 2B (Pre-Exam)
1st Semester – Business Information Management – 2B (Pre-Exam)

 

1st Semester - Business Information Management - 3B (Pre-Exam)
1st Semester – Business Information Management – 3B (Pre-Exam)
1st Semester - Business Information Management - 4B (Pre-Exam)
1st Semester – Business Information Management – 4B (Pre-Exam)
1st Semester - Business Information Management - 4A (Pre-Exam)
1st Semester – Business Information Management – 4A (Pre-Exam)
1st Semester - Business Information Management - All Sections (Pre-Exam)
1st Semester – Business Information Management – All Sections (Pre-Exam)

As you can see, all of these classes have a heavy shift to the A’s with 71% of all students enrolled. Just under 22% of students are evenly split between B’s and C’s.

Currently, all BIM classes together have just over a 7% failure rate for the semester.

 

Progress Report 4 Grades

It’s once again that time. It’s time for progress reports. I’ve lost count of how many times I’ve been asked by my students if they can lose their eligibility or can only re-gain it at this progress check. As a UIL coach, I have to say that’s not filling me with a lot of confidence as we come into the proverbial home-stretch of the semester.

For the record, students can only lose eligibility at a report card (each 9-weeks) and at the state-mandated 6-week grade check that is obviously 6-weeks into the start of the school year.

This progress check, I also began to adjust grades to be in alignment with the campus policies for grade distribution. In the graphs below, the blue represents the original (uncurved) grades for the grading period and the red represents the modified (curved) grades for the grading period.

The first cluster is percentage of A’s, the second cluster is percentage of B’s, the third cluster is percentage of C’s, and the final cluster is percentage of F’s.

Progress Report 4 - Computer Science I
Progress Report 4 – Computer Science I
Progress Report 4 - Principles of Technology
Progress Report 4 – Principles of Technology
Progress Report 4 - Robotics
Progress Report 4 – Robotics
Progress Report 4 - BIM (All Sections)
Progress Report 4 – BIM (All Sections)

While it appears that some classes tremendously benefited from the modifications (e.g. Computer Science I) and other received little benefit (e.g. BIM – All Sections), remember that you are looking at percentages and not actual numbers.

At the time of this writing, my current enrollment numbers are as follows:

  • Computer Science I – 14 Students (1 Section)
  • Principles of Technology – 25 Students (1 Section)
  • Robotics & Automation – 18 Students (1 Section)
  • Business Information Management I – 83 Students (4 Sections)

As you can see, in some of the classes, an adjustment to the grades of 2 students can reflect as a major grade shift in some classes (e.g. 14% in Computer Science I) and a minor grade shift in other classes (e.g. 2% in BIM – All Sections).

Progress Report 3 Grades

It has been 3 weeks since the 1st quarter of the school year wrapped-up. As such, we’re at another grade check – Progress Report 3.

As this is a progress report, students cannot lose eligibility per UIL guideline, they can only regain eligibility if they lost it 3 weeks ago when the 1st quarter ended.

Following is how my 4 courses performed at this grade check.

Computer Science I

For the past 3 weeks, Computer Science I has had 1 quiz grade and 5 daily grades. One of those daily grades was eligible for a grade drop as there was an unusual disruption to the instruction that day.

Progress Report 3 - Computer Science I
Progress Report 3 – Computer Science I

As you can see, the grades are starting to separate considerably from where they were in prior grading cycles. This grading cycle has had a challenging concept covered for much of its duration: Base-2, Base-8, Base-10, and Base-16 numbering systems and conversions between and arithmetic within those systems.

Robotics

For the past 3 weeks, Robotics has had only 4 daily grades.

Progress Report 3 - Robotics
Progress Report 3 – Robotics

As is the case with Computer Science, the grades have started to separate considerably from where they were in prior grading cycles. Nothing during this grading cycle has been very difficult, but some students have elected to not participate and their grades reflect this decision.

Principles of Technology

For the past 3 weeks, Principles of Technology has had 3 daily grades, 1 quiz grade (Egg Drop Project) and 1 test grade (Unit 2).

Progress Report 3 - Principles of Technology
Progress Report 3 – Principles of Technology

Unlike the preceding two classes, this class is relatively tightly packed in the 70+ range with a peak in the 90+ range. Given the materials covered, I am relatively pleased with these grades.

Business Information Management I

For the past 3 weeks, all 4 of my BIM classes have had 4 daily grades and 1 test grade (Tables in MS Word).

Progress Report 3 - BIM 2B
Progress Report 3 – BIM 2B
Progress Report 3 - BIM 3B
Progress Report 3 – BIM 3B
Progress Report 3 - BIM 4B
Progress Report 3 – BIM 4B
Progress Report 3 - BIM 4A
Progress Report 3 – BIM 4A

As you can see, several of the BIM classes have multiples A’s as well as multiple failures with the exception of BIM 3B. Many students have elected to not submit class assignments or their tests or both. As such, this has had a major impact on their grades. All students who have submitted work are passing.

1st Quarter Grades

The first 25% of the 2016/2017 Academic Year is now in the books! Hard to believe – but, it’s true. This past Friday, 14-October-2016 marked the end of the first 9-week grading quarter of the year.

Here’s a recap of how the grades broke out for my various classes:

Computer Science I (1B)

Q1 2016 Grade Summary - Computer Science
Q1 2016 Grade Summary – Computer Science

This quarter ended with an introduction into iterations, which is one of the more challenging concepts for students to comprehend. As such, the grades fluctuated a little bit at the end of the grading cycle.

The only 2 failures were due to poor performance on the unit tests and not taking advantage of the opportunity to submit corrections to bring the grades higher.

Principles of Technology (2A)

Q1 2016 Grade Summary - Principles of Technology
Q1 2016 Grade Summary – Principles of Technology

The quarter ended with an introduction to Conservation of Energy and Momentum. The only two failures in the class were not a direct result of poor performance on a test, but due to lack of participating on projects.

The only 2 failing students elected to not participate on various major projects during the first quarter (e.g. air skimmer, water bottle rocket, etc…).

Robotics & Automation (3A)

Q1 2016 Grade Summary - Robotics and Automation
Q1 2016 Grade Summary – Robotics and Automation

Unlike the previous two classes, all students in this class passed all objectives for the quarter. Any low-grades were once again due to students not submitting work and not due to lack of understanding.

Business Information Management I (2B)

Q1 2016 Grade Summary - Business Information Management (2B)
Q1 2016 Grade Summary – Business Information Management (2B)

While the graph shows 1 student failing this class during this period, that grade was adjusted up to passing as it was within the 69.0 to 69.9 range. I personally do not let students sit on a “9”. I always override and round up the 69, 79, and 89.

As such, like the 3A Robotics and Automation class, this class had no failures!

Business Information Management I (3B)

Q1 2016 Grade Summary - Business Information Management (3B)
Q1 2016 Grade Summary – Business Information Management (3B)

Like the BIM class before it, this class had no failures! However, this class genuinely had zero failures and also held the highest average of all of my BIM classes! Way to go BIM 3B!

Business Information Management I (4A)

Q1 2016 Grade Summary - Business Information Management (4A)
Q1 2016 Grade Summary – Business Information Management (4A)

Like the BIM class before it, this class also genuinely had zero failures and came in a close second for the highest average of my BIM classes! Good work BIM 4A!

Business Information Management I (4B)

Q1 2016 Grade Summary - Business Information Management (4B)
Q1 2016 Grade Summary – Business Information Management (4B)

Like the BIM class before it, this class also genuinely had zero failures. However, this class had the highest number of low-C’s of any of the BIM classes. I am going to need to watch this class closely as there were far too many students who were too close to falling below the cut-off for my comfort.

What Will Be Changing

As we enter the 2nd Quarter of the year a few things will be changing in all of my classes.

  1. Seating chart will be established for Computer Science I to cut down on incidents of students disrupting class and interfering with learning.
  2. Seating chart will be established for Principles of Technology to address incidents of student disruptions.
  3. Seating chart will be established for Business Information Management (4B) to address student interactions that are preventing work from being completed in a timely manner.
  4. Students who fail to complete an assignment will be immediately assigned to come in for lunch/advisory on that day if in 1st or 2nd periods and on the next day if in 3rd or 4th periods.
  5. Students will not be allowed to take “breaks” on the computers when working. They will be allowed to listen to music, but video games will be blocked until complete and proper work is submitted.
  6. Campus late policy will be implemented as written. Work will no longer be taken after 5 days from assigned date except in rare and extreme cases.

PR2 Grades – Computer Science

Well, here we are – 6 calendar weeks into the 2016/2017 academic year! While we are running 9-week quarter grading cycles, the UIL requires eligibility to be calculated at the first 6-weeks and then at each progress reporting period – approximately every 3 weeks.

Grade Distribution - 1(B) Computer Science I
Grade Distribution – 1(B) Computer Science I

Here, you can see that I have a total of 16 students on the roster at the time of the snapshot.

  • 8/16 (50%) have A’s
  • 3/16 (18.75%) have B’s
  • 3/16 (18.75%) have C’s
  • 1/16 (6.25%) have F’s
  • 1/16 (6.25%) are Incomplete/Ungraded

To date, this class has had 1 major grade (25% of average), 3 intermediate grades (25% of average), and 8 minor grades (50% of average).

The next grade check will be at the conclusion of Q1, which ends on Friday, 14-October-2016.

PR2 Grades – Robotics

Well, here we are – 6 calendar weeks into the 2016/2017 academic year! While we are running 9-week quarter grading cycles, the UIL requires eligibility to be calculated at the first 6-weeks and then at each progress reporting period – approximately every 3 weeks.

Grade Distribution - 3(A) Robotics
Grade Distribution – 3(A) Robotics

Here, you can see that I have a total of 18 students on the roster at the time of the snapshot.

  • 16/18 (89%) have A’s
  • 1/18 (5.5%) have B’s
  • 1/18 (5.5%) have C’s

To date, this class has had no major grades (25% of average), 2 intermediate grades (25% of average), and 11 minor grades (50% of average).

The next grade check will be at the conclusion of Q1, which ends on Friday, 14-October-2016.

PR2 Grades – Principles of Technology

Well, here we are – 6 calendar weeks into the 2016/2017 academic year! While we are running 9-week quarter grading cycles, the UIL requires eligibility to be calculated at the first 6-weeks and then at each progress reporting period – approximately every 3 weeks.

Grade Distribution – Principles of Technology 2(A)

Here, you can see that I have a total of 24 students on the roster at the time of the snapshot.

  • 6/25 (24.0%) have A’s
  • 11/25 (44.0%) have B’s
  • 5/25 (20.0%) have C’s
  • 2/25 (8.0%) have F’s
  • 1/25 (4.0%) are Incomplete/Ungraded

To date, this class has had 1 major grade (25% of average), 3 intermediate grades (25% of average), and 11 minor grades (50% of average).

The next grade check will be at the conclusion of Q1, which ends on Friday, 14-October-2016.

UPDATE: 02-October-2016

Missing work has been submitted by some students and the grade distributions have shifted to the following…

  • 6/25 (24.0%) have A’s
  • 12/25 (48.0%) have B’s
  • 5/25 (20.0%) have C’s
  • 1/25 (4.0%) have F’s
  • 1/25 (4.0%) are Incomplete/Ungraded

PR2 Grades – Business Information Management

Well, here we are – 6 calendar weeks into the 2016/2017 academic year! While we are running 9-week quarter grading cycles, the UIL requires eligibility to be calculated at the first 6-weeks and then at each progress reporting period – approximately every 3 weeks.

Grade Distribution - 2(B) BIM
Grade Distribution – 2(B) BIM
Grade Distribution - 3(B) BIM
Grade Distribution – 3(B) BIM
Grade Distribution - 4(B) BIM
Grade Distribution – 4(B) BIM
Grade Distribution - 4(A) BIM
Grade Distribution – 4(A) BIM

Here, you can see that I have a total of 18 students on the roster at the time of the snapshot.

  • 57/91 (62.6%) have A’s
  • 23/91 (25.3%) have B’s
  • 8/91 (8.8%) have C’s
  • 0/91 (0.0%) have F’s
  • 3/91 (3.3%) are Incomplete/Ungraded

To date, this class has had no major grades (25% of average), 3 intermediate grades (25% of average), and 9 minor grades (50% of average).

The next grade check will be at the conclusion of Q1, which ends on Friday, 14-October-2016.